Master Bond UV23FLDC-80TK is a moderate viscosity, cationic type system that offers both UV light and heat curing mechanisms.
It cures readily within 20-30 seconds when exposed to a UV light source emitting a wavelength of 320-365 nm.
The adhesive can also undergo a secondary heat curing for shadowed areas, typically curing in 60-90 minutes at 80-85°C.
Designed for medical device manufacturing, MasterSil 711Med passes ISO 10993-5 testing.
It is a one part, flowable, room temperature vulcanizing (RTV) silicone which needs no mixing, and can be used for bonding, sealing,
coating and form-in-place gasketing applications. This non-corrosive, translucent compound withstands many sterilization methods,
Master Bond Supreme 17HTND-2 is a toughened epoxy system for bonding and sealing applications.
It is a true one component system, not premixed and frozen, with an unlimited working life at room temperature.
Supreme 17HTND-2 is thermally stable, featuring a high glass transition temperature (Tg) of 410°F (210°C).
Master Bond EP21LVFL combines good flexibility with a solid strength profile.
It is curable at room temperature with a long working life of 120-160 minutes at 75°F for a 100 gram batch and features
a flowable initial mixed viscosity of 10,000-14,000 cps. This epoxy generates low exotherm making it
Master Bond EP40TCMed is a two part, room temperature curing epoxy system that meets the requirements
of ISO 10993-5 for non-cytotoxicity. It is thermally conductive, electrically non-conductive and can be
utilized as an adhesive or sealant in various medical and wearable device applications.
Master Bond Supreme 3DM-85 is a no mix, non-solvent based, one component epoxy. This thixotropic paste material was formulated to serve
as the damming compound in dam-and-fill encapsulation applications. It can also be utilized for bonding and sealing,
especially where no flow is needed since the material cures in place and will not run or slump.