Silicone substrates are most often bonded by the use of silicone adhesives. Adhesion can be enhanced by roughening or cleaning the parts to be bonded and through the use of silicone primers. A newly developed approach that allows for bonding of silicone substrates with non-silicone type adhesives, such as epoxies, involves the pretreatment of silicone substrates with gas plasma.
Master Bond Adhesives, Sealants and Coatings for Bonding Silicone Elastomers
 |
MasterSil 153 Two part silicone paste for bonding and sealing applications. Outstanding flexibility. Low exotherm and long pot life system. Self priming feature. Contains no solvents or diluents. Superior electrical insulation properties. Can cure in wide sections vertically and horizontally. Serviceable from -65°F to +400°F |
 |
MasterSil 711 Exceptionally fast setting, high performance, non-corrosive silicone rubber. Widely used in manufacturing and repair applications. Has superb flexibility. Servicable from -75°F to +400°F. |
 |
MasterSil 323Med Two part silicone paste for bonding, sealing and encapsulating applications. Optically clear in thin sections. Outstanding flexibility. Contains no solvents or diluents. Low to moderate viscosity. Low dielectric constant. Addition cured, no by-products released during cure. Serviceable from -65°F to +400°F. |
 |
MasterSil 705 Translucent flowable paste for bonding, sealing, coating, formed-in-place gaskets. Cures upon exposure to atmospheric moisture. Serviceable from -75°F to 400°F. Available in tubes, cartridges. |
